Operating Sticks

Operating sticks for hot stick working are used to switch and provide protection for live equipment or to attach earthing and short-circuiting devices.

IS Insulating Sticks

The insulating sticks allow safe work on live electrical systems with easy configuration of hexagonal and t-pin tool ends.

SCS Switching Sticks

The SCS Switching Sticks provide an insulated and safe reach up to 2.8 meters for live nominal voltages up to 123kV. The end tool provides a sturdy right angle lever for turning handles and switches.

RST Rescue Rods

For hot stick working when rescuing people from a danger zone close to live equipment as per DIN VDE 0105-100 (EN 50110).
  • Insulating stick as per DIN VDE 0681-1
  • For rescuing people from a danger zone following electrical accidents
  • For nominal voltages up to 72.5 kV
  • Rescue hook made from solid plastic (protected against bridging)
  • For indoor and outdoor use

SZ Fuse Tongs

The SZ fuse tong safety sticks provide safe reach and sturdy clamping for installing and removing high energy fuses in accordance with DIN VDE 0105-100 (EN 50110).

Ice Removal Rod

Icicles and ice accumulation on or near live electrical lines pose severe hazards. The Ice Removal Rod and Hammer tool accessory provide safe working reach up to 5m on 25kV systems.

Insulating Stick with Crank Handle

The hand crank handle and extendable insulated stick allows rotational leverage to be applied on live systems up to 36kV from a safe working distance of up to 2.7m (8.7ft).

Insulating Stick Kit for Cleaning the Windscreens of Electric Locomotives

Windshield and electrical equipment cleaning in wet weather is easy and safe with the insulated safety stick and adjustable brush tool. The handle can reach out to 3.1m (10ft) near 25kV overhead lines.
back to top